Used to create climate charts, with average monthly minimum and maximum temperatures. More information on the interpretation of the chart can be found here.

In articles where SI units (°C, mm) are preferred, input the data in those units. This is the default state - no further parameters are needed. In articles where imperial units (°F, inches) are preferred, input data in those units and specify the parameter units=imperial (see below). This parameter must be used so that the units are labeled correctly and so the conversion is done properly.

argument 1

Appears in the heading

arguments 2-37

The data. Think of it as 12 rows, one for each month, with 3 columns for minimum temperature, maximum temperature and precipitation.

float

left, right or none.

clear

left, right, both or none.

source

Supply the source of your data

((climate chart|[[Amsterdam]]
|1|5|62
|0|6|43
|2|9|59
|4|12|41
|8|17|48
|10|20|68
|13|21|66
|12|22|61
|10|18|82
|7|14|85
|4|9|89
|2|7|75
|float=right
|clear=both
))

((climate chart|[[Buenos Aires]]
|17|29|79
|17|28|71
|16|26|109
|12|22|89
|8|18|76
|5|14|61
|6|14|56
|6|16|61
|8|18|79
|10|21|86
|13|24|84
|16|28|99
|float=left
|source=[http://www.bbc.co.uk/weather/ BBC Weather]
))

((climate chart|[[Cuzco]]
|7|20|163
|7|21|150
|7|21|109
|4|22|51
|2|21|15
|1|21|5
|-1|21|5
|1|21|10
|4|22|25
|6|22|66
|6|23|76
|7|22|137
))

((climate chart|[[Anchorage]]
|9|22|.68
|12|26|.74
|18|34|.65
|29|44|.52
|39|55|.7
|47|62|1.06
|52|65|1.7
|49|63|2.93
|41|55|2.87
|28|40|2.09
|16|28|1.09
|11|24|1.05
|float=right
|clear=both
|units=imperial
))