Tungsten trioxide
![]() | |
![]() | |
Names | |
---|---|
IUPAC name
Tungsten trioxide
| |
Other names
Tungstic anhydride
Tungsten(VI) oxide Tungstic oxide | |
Identifiers | |
3D model (JSmol)
|
|
ECHA InfoCard | 100.013.848 |
PubChem CID
|
|
RTECS number |
|
UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
WO3 | |
Molar mass | 231.84 g/mol |
Appearance | Canary yellow powder |
Density | 7.16 g/cm3 |
Melting point | 1,473 °C (2,683 °F; 1,746 K) |
Boiling point | 1,700 °C (3,090 °F; 1,970 K) approximation |
insoluble | |
Solubility | slightly soluble in HF |
−15.8·10−6 cm3/mol | |
Structure | |
Monoclinic, mP32 | |
P121/n1, No. 14 | |
Octahedral (WVI) Trigonal planar (O2– ) | |
Hazards | |
Occupational safety and health (OHS/OSH): | |
Main hazards
|
Irritant |
Flash point | Non-flammable |
Safety data sheet (SDS) | External MSDS |
Related compounds | |
Other anions
|
Tungsten trisulfide |
Other cations
|
Chromium trioxide Molybdenum trioxide |
Tungsten(III) oxide Tungsten(IV) oxide | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Tungsten(VI) oxide, also known as tungsten trioxide is a chemical compound of oxygen and the transition metal tungsten, with formula WO3. The compound is also called tungstic anhydride, reflecting its relation to tungstic acid H2WO4. It is a light yellow crystalline solid.[1]
Tungsten(VI) oxide occurs naturally in the form of hydrates, which include minerals: tungstite WO3·H2O, meymacite WO3·2H2O and hydrotungstite (of the same composition as meymacite, however sometimes written as H2WO4). These minerals are rare to very rare secondary tungsten minerals.
History
In 1841, a chemist named Robert Oxland gave the first procedures for preparing tungsten trioxide and sodium tungstate.[2] He was granted patents for his work soon after, and is considered to be the founder of systematic tungsten chemistry.[2]
Structure and properties
The crystal structure of tungsten trioxide is temperature dependent. It is tetragonal at temperatures above 740 °C, orthorhombic from 330 to 740 °C, monoclinic from 17 to 330 °C, triclinic from −50 to 17 °C, and monoclinic again at temperatures below −50 °C.[3] The most common structure of WO3 is monoclinic with space group P21/n.[2]
The pure compound is an electric insulator, but oxygen-deficient varieties, such as WO2.90 = W20O58, are dark blue to purple in color and conduct electricity. They can be prepared by combining the trioxide and the dioxide WO2 at 1000 °C in vacuum.[4][1]
Possible signs of superconductivity with critical temperatures Tc = 80–90 K were claimed in sodium-doped and oxygen-deficient WO3 crystals. If confirmed, these would be the first superconducting materials containing no copper, with Tc higher than the boiling point of liquid nitrogen at normal pressure. [5][4]
Preparation
Industrial
Tungsten trioxide is obtained as an intermediate in the recovery of tungsten from its minerals.[6] Tungsten ores can be treated with alkalis to produce soluble tungstates. Alternatively, CaWO4, or scheelite, is allowed to react with HCl to produce tungstic acid, which decomposes to WO3 and water at high temperatures.[6]
- CaWO4 + 2 HCl → CaCl2 + H2WO4
- H2WO4 → H2O + WO3
Laboratory
Another common way to synthesize WO3 is by calcination of ammonium paratungstate (APT) under oxidizing conditions:[2]
Reactions
Tungsten trioxide can be reduced with carbon or hydrogen gas yielding the pure metal.[citation needed]
- 2 WO3 + 3 C → 2 W + 3 CO2 (high temperature)
- WO3 + 3 H2 → W + 3 H2O (550–850 °C)
Uses
Tungsten trioxide is a starting material for the synthesis of tungstates. Barium tungstate BaWO4 is used as a x-ray screen phosphors. Alkali metal tungstates, such as lithium tungstate Li2WO4 and cesium tungstate Cs2WO4, give dense solutions that can be used to separate minerals.[1] Other applications, actual or potential, include:
- Fireproofing fabrics[7]
- Gas and humidity sensors.[8][1]
- Ceramic glazes where it gives a rich yellow color.[6][1]
- Electrochromic glass, such as in smart windows, whose transparency can be changed by an applied voltage.[9][10][1]
- Photocatalytic water splitting.[11][12][13][14]
- Substrate for surface-enhanced Raman spectroscopy replacing noble metals.[15][16][17][18]
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.