For faster navigation, this Iframe is preloading the Wikiwand page for Survey township.

Survey township

1826 map of the Connecticut Western Reserve in northern Ohio showing both survey and civil townships. The survey townships are represented by the numbers (horizontal "town" and vertical "range" numbers), and the civil townships using the same boundaries are represented by the names.
1877 map of Warren County, Indiana. Of the civil townships shown on this map, only Pine Township exactly matches a survey township with 36 sections.

A survey township, sometimes called a Congressional township or just township, as used by the United States Public Land Survey System and by Canada's Dominion Land Survey is a nominally-square area of land that is nominally six survey miles (about 9.66 km) on a side. Each 36-square-mile (about 93.2 km2) township is divided into 36 sections of one square mile (640 acres, roughly 2.6 km2) each.[1] The sections can be further subdivided for sale.

The townships are referenced by a numbering system that locates the township in relation to a principal meridian (north-south) and a base line (east-west). For example, Township 2 North, Range 4 East is the 4th township east of the principal meridian and the 2nd township north of the base line.

History in the US

Township (exterior) lines were originally surveyed and platted by the United States General Land Office using contracted private survey crews. Later survey crews subdivided the townships into section (interior) lines. Virtually all lands covered by this system were sold according to those boundaries and are marked on the U.S. Geological Survey topographic maps.

Prior to standardization, some of the Ohio Lands (the United States Military District, the Firelands and the Connecticut Western Reserve) were surveyed into townships of 5 miles (8.0 km) on each side. These are often known as Congressional Townships.[2][3]

Sections are divided into quarter-sections of 160 acres (65 ha) each and quarter-quarter sections of 40 acres (16 ha) each. In the Homestead Act of 1862, one quarter-section of land was the amount allocated to each settler. Stemming from that are the idiomatic expressions, "the lower 40", the 40 acres on a settler's land that is lowest in elevation, in the direction towards which water drains toward a stream, and the "back forty", the portion farthest from the settler's dwelling.

History in Canada

In western Canada, the Dominion Land Survey adopted a similar format for survey townships, which do not form administrative units. These townships also have an area of approximately 36 square miles (six miles by six miles).

These townships include road allowances, so their nominal dimensions are a bit longer than six miles. In the first and second phases of the survey (Manitoba and parts of Saskatchewan), townships are nominally 489 chains (6.11 mi; 9.84 km) east-west and north-south.[4] In the third phase of the survey (British Columbia, Alberta and most of Saskatchewan), townships are nominally 486 chains (6.08 mi; 9.78 km) east-west and 483 chains (6.04 mi; 9.72 km) north-south.[5] The actual area of a given township differs from the nominal because of systematic effects (due to the design of the survey) and surveying errors.

Survey township vs. civil township

Survey townships are distinct from civil townships. A survey township is used to establish boundaries for land ownership, while a civil township is a form of local government. In states with civil townships, the two types of townships often coincide. County lines, especially in western states, usually follow survey township lines, leading to the large number of rectangular counties in the Midwest, which are agglomerations of survey townships.[6]

Survey township: A. Township Line, B. Principal Meridian, C. Range Line, D. Initial Point, E. Base Line, and F. Township, according to BLM

See also

References

  1. ^ Lizette Twain. Understanding Townships, Bureau of Land Management, February 11, 2015
  2. ^ White, C. Albert. A History of the Rectangular Survey System. Washington, D.C.: U.S. Dept. of the Interior, Bureau of Land Management, 1983
  3. ^ "Cadastral History". Archived from the original on 2014-11-13. Retrieved 2014-11-19.
  4. ^ McKercher, Robert B. (1986). Understanding Western Canada's Dominion Land Survey System. University of Saskatchewan. p. 13.
  5. ^ McKercher, Robert B. (1986). Understanding Western Canada's Dominion Land Survey System. University of Saskatchewan. p. 15.
  6. ^ Geological Survey Circular. The Survey. 1933. p. 24.

Further reading

{{bottomLinkPreText}} {{bottomLinkText}}
Survey township
Listen to this article

This browser is not supported by Wikiwand :(
Wikiwand requires a browser with modern capabilities in order to provide you with the best reading experience.
Please download and use one of the following browsers:

This article was just edited, click to reload
This article has been deleted on Wikipedia (Why?)

Back to homepage

Please click Add in the dialog above
Please click Allow in the top-left corner,
then click Install Now in the dialog
Please click Open in the download dialog,
then click Install
Please click the "Downloads" icon in the Safari toolbar, open the first download in the list,
then click Install
{{::$root.activation.text}}

Install Wikiwand

Install on Chrome Install on Firefox
Don't forget to rate us

Tell your friends about Wikiwand!

Gmail Facebook Twitter Link

Enjoying Wikiwand?

Tell your friends and spread the love:
Share on Gmail Share on Facebook Share on Twitter Share on Buffer

Our magic isn't perfect

You can help our automatic cover photo selection by reporting an unsuitable photo.

This photo is visually disturbing This photo is not a good choice

Thank you for helping!


Your input will affect cover photo selection, along with input from other users.

X

Get ready for Wikiwand 2.0 🎉! the new version arrives on September 1st! Don't want to wait?