For faster navigation, this Iframe is preloading the Wikiwand page for Palmer carbine.

Palmer carbine

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: "Palmer carbine" – news · newspapers · books · scholar · JSTOR (October 2016) (Learn how and when to remove this message)

The Palmer model 1865 carbine is a single-shot bolt-action rifle patented in 1863 by E. G. Lamson and Company of Shelburne Falls, Massachusetts.[1] 1000 Palmer carbines were delivered to Union forces in the American Civil War one month after the war ended.[1] All rifles (designed to be carbines for cavalry soldiers[1]) were subsequently sold to civilians after the war. The rifle was the first bolt-action rifle to be accepted for use by the US Army Ordnance Department.[2]

Unlike traditional bolt actions, which contain the firing pin centered in the bolt, the Palmer's bolt was machined from a solid block of tubular metal, which had screw type lands and grooves to lock the bolt in place via a short, stubby handle. The hammer of the weapon (located on the right side of the receiver like all other percussion fired rifles of the time period) holds the firing pin at the tip. A tooled, milled slot is visible on the head of the bolt canted toward the right side allows a slight opening for the firing pin atop the hammer to strike the rim-fired cartridge, usually the 56-50 rim fire. The bolt was designed for single-shot action; the cartridges were loaded one at a time. The design was quite revolutionary, and was seen at the time as a simple breech modification to weapons of the time period to accept metallic cartridges instead of the traditional powder, ball, wad, ram rod and percussion cap, which consumed time during loading procedures. The designer understood that gunsmiths could hopefully modify current percussion rifles from the breech of the gun in the same way flintlocks were modified to percussion using a relatively simple process. The downfall of the rifle was the positioning of the hammer where the firing pin hits the rim of the cartridge, and the small space on the bolt where the two parts meet with the bullet rim when the trigger is pulled.

Ultimately the actions of rifles like the Spencer rifle and the Sharps rifle were preferred over the Palmer. Its unique significant design is a predecessor of all modern bolt-action-type rifles.

References

[edit]
  1. ^ a b c "Palmer Model 1865 Bolt-Action Carbine (1865)". Military Factory. 2013-11-04. Retrieved 2016-10-07.
  2. ^ "Palmer Carbine at RIA". forgottenweapons.com. 2015-06-15. Retrieved 2016-10-07.


{{bottomLinkPreText}} {{bottomLinkText}}
Palmer carbine
Listen to this article

This browser is not supported by Wikiwand :(
Wikiwand requires a browser with modern capabilities in order to provide you with the best reading experience.
Please download and use one of the following browsers:

This article was just edited, click to reload
This article has been deleted on Wikipedia (Why?)

Back to homepage

Please click Add in the dialog above
Please click Allow in the top-left corner,
then click Install Now in the dialog
Please click Open in the download dialog,
then click Install
Please click the "Downloads" icon in the Safari toolbar, open the first download in the list,
then click Install
{{::$root.activation.text}}

Install Wikiwand

Install on Chrome Install on Firefox
Don't forget to rate us

Tell your friends about Wikiwand!

Gmail Facebook Twitter Link

Enjoying Wikiwand?

Tell your friends and spread the love:
Share on Gmail Share on Facebook Share on Twitter Share on Buffer

Our magic isn't perfect

You can help our automatic cover photo selection by reporting an unsuitable photo.

This photo is visually disturbing This photo is not a good choice

Thank you for helping!


Your input will affect cover photo selection, along with input from other users.

X

Get ready for Wikiwand 2.0 ๐ŸŽ‰! the new version arrives on September 1st! Don't want to wait?