For faster navigation, this Iframe is preloading the Wikiwand page for Laser turntable.

Laser turntable

ELP Laser turntable (LT-2XA) and RME Fireface 800

A laser turntable (or optical turntable) is a phonograph that plays standard LP records (and other gramophone records) using laser beams as the pickup instead of using a stylus as in conventional turntables. Although these turntables use laser pickups, the same as Compact Disc players, the signal remains in the analog realm and is never digitized.


William K. Heine presented a paper "A Laser Scanning Phonograph Record Player" to the 57th Audio Engineering Society (AES) convention in May 1977.[1] The paper details a method developed by Heine that employs a single 2.2 mW helium–neon laser for both tracking a record groove and reproducing the stereo audio of a phonograph in real time. In development since 1972, the working prototype was named the "LASERPHONE", and the methods it used for playback was awarded U.S. Patent 3,992,593 on 16 November 1976.[2] Heine concluded in his paper that he hoped his work would increase interest in using lasers for phonographic playback.


Four years later in 1981 Robert S. Reis, a graduate student in engineering at Stanford University, wrote his master's thesis on "An Optical Turntable".[3] In 1983 he and fellow Stanford electrical engineer Robert E. Stoddard founded Finial Technology to develop and market a laser turntable, raising $7 million in venture capital. In 1984 servo-control expert Robert N. Stark joined the effort.[4][5]

A non-functioning mock-up of the proposed Finial turntable was shown at the 1984 Consumer Electronics Show (CES), generating much interest and a fair amount of mystery, since the patents had not yet been granted and the details had to be kept secret.[6] The first working model, the Finial LT-1 (Laser Turntable-1), was completed in time for the 1986 CES. The prototype revealed an interesting flaw of laser turntables: they are so accurate that they "play" every particle of dirt and dust on the record, instead of pushing them aside as a conventional stylus would. The non-contact laser pickup does have the advantages of eliminating record wear, tracking noise, turntable rumble and feedback from the speakers, but the sound is still that of an LP turntable rather than a Compact Disc. The projected $2,500 street price (later raised to $3,786 in 1988) limited the potential market to professionals (libraries, radio stations and archivists) and a few well-heeled audiophiles.[7]

The Finial turntable never went into production. After Finial showed a few hand-built (and finicky)[8] prototypes, tooling delays, component unavailability (in the days before cheap lasers), marketing blunders, and high development costs kept pushing back the release date. The long development of the laser turntable exactly coincided with two major events, the early 1980s recession, and the introduction of the Digital Compact Disc, which soon began flooding the market at prices comparable to LPs (with CD players in the $300 range). Vinyl record sales plummeted, and many established turntable manufacturers went out of business as a result.

With over US$20 million in venture capital invested, Finial faced a marketing dilemma: forge ahead with a selling price that would be too high for most consumers, or gamble on going into mass production at a much lower price and hope the market would lower costs. Neither seemed viable in a rapidly-shrinking market.


Finally, in late 1989 after almost seven years of research, Finial's investors cut their losses and liquidated the firm, selling the patents to Japanese turntable maker BSR, which became CTI Japan, which in turn created ELP Japan for continued development of the "super-audiophile" turntable. After eight more years of development the laser turntable was finally put on sale in 1997 – twenty years after the initial proposal – as the ELP LT-1XA Laser Turntable, with a list price of US$20,500 (in 2003 the price was lowered to US$10,500).[9] The turntable, which uses two lasers to read the groove and three more to position the head, does allow one to vary the depth at which the groove is read, possibly bypassing existing record wear. It will not, however, read clear or colored vinyl records.[10] ELP sells built-to-order laser turntables directly to consumers in two versions (LT-basic, and LT-master),[11] at a reported cost (unpublished) of approximately $16,000 for the basic model.[12]


In May 2018, Almedio of Japan, a computer drive manufacturer,[13] presented the Optora ORP-1 optical (laser) turntable at the HIGH END Munich audio show.[14] Few details were provided by the company[15] because, like the 1984 presentation of the Finial turntable, the Optora was a non-working mockup. Company representatives indicated the turntable would use five lasers and be belt-driven,[16] like the ELP. However, after producing some promotional materials (since deleted), a price was never announced[17] and the Optora has not been put on the market. The company's website devoted to the turntable has since been deleted.[18]


In a 2008 review of the model ELP LT-1LRC, Jonathan Valin in The Absolute Sound claimed "If I were to describe its presentation in a few words, they would be "pleasant but dull."" He commended the tonal accuracy of playback, but criticized the lack of dynamic range and bass response (limitations of the vinyl records themselves). Records must be wet-cleaned immediately before playback because, says Valin, "Unlike a relatively massive diamond stylus, which plows through a record’s grooves like the prow of a ship, the ELP’s tiny laser-beam styli have next to no mass [sic] and cannot move dust particles out of their way. Any speck of dirt, however minute, is read by the lasers along with the music." Michael Fremer, writing in Stereophile in 2003 noted, "...consider the LT's many pluses: no rumble or background noise of any kind; no cartridge-induced resonances or frequency-response anomalies; no compromise in channel separation (the ELP guarantees channel separation in excess of what the best cutter heads offer); zero tracking or tracing error; no inner-groove distortion; no skating; no adjustments of VTA or azimuth to worry about; no tangency error (like the cutter head itself, the laser pickup is a linear tracker); no record wear; a claimed frequency response of 10Hz–25kHz; and, because the laser beam is less than a quarter the contact area of the smallest elliptical stylus, it can negotiate sections of the engraved waveform that even the smallest stylus misses." But, he notes, all this comes at a cost: "[T]he LT-2XRC's laser pickup was unable to distinguish groove modulations from dirt. Records that sound dead quiet on a conventional turntable could sound as if I was munching potato chips while listening to the ELP. Bummer. There's a solution, of course: a record-cleaning machine. This can't be considered an "accessory" with the LT: it's mandatory. Even new records fresh out of the jacket can sound crunchy."[19] He concludes, "Ironically, if you listen to the music itself, you won't know you're listening to an LP. It's almost like a reel-to-reel tape. Unfortunately, when there is noise, it will always make you aware that you're listening to an LP. That's the confounding thing about this fabulous contraption."

Optical record scanning

A similar technology is to scan or photograph the grooves of the record, and then reconstruct the sound from the modulation of the groove revealed by the image. Research groups that developed this technology include:

  • IRENE developed by physicists Carl Haber and Vitaliy Fadeyev of the Lawrence Berkeley National Laboratory. Installed in the Library of Congress late in 2006, IRENE (for Image, Reconstruct, Erase Noise, Etc.)[20] uses a camera rotating around the record and taking detailed photographs of the grooves. Software then uses the digital images to reconstruct the sound.[21] In 2018 the system was used to play, for the first time, the only known recording of Alexander Graham Bell's voice. IRENE often produces a large amount of hiss with the recording, but it is very capable of removing pops and clicks produced by imperfections on the record surface.[22]
  • SAPHIR system developed at INA in 2002 (patented in France in 2004).[23]
  • VisualAudio developed by the Swiss National Sound Archives and the School of Engineering and Architecture of Fribourg.
  • A laser beam reflection method was developed by Japanese scientists in Hokkaido university in 1986 for the purpose of reading audio recordings of Ainu language made on fragile wax cylinders.[24]

See also


  1. ^ Heine, William K. "A laser scanning phonograph record player." Audio Engineering Society Convention 57. Audio Engineering Society, 1977.
  2. ^ "Patent US3992593 – Disc phonograph record playback by laser generated diffraction pattern – Google Patents". Archived from the original on 29 January 2014. Retrieved 23 October 2011.
  3. ^ "Robert Reis Resum&#233". Archived from the original on 16 November 2011. Retrieved 23 October 2011.
  4. ^ "Robert N Stark – Inventor Patent Directory, Page 1". Archived from the original on 15 March 2014. Retrieved 23 October 2011.
  5. ^ The development of and technology behind the Finial turntable was covered in depth in Stereophile. See the August 1986, October 1988, January, February, and November 1989, July 1990, and June 1991 issues.
  6. ^ U.S. patent 4,870,631
  7. ^ Orban, Robert. "Maintaining Audio Quality in the Broadcast Facility – 2008 Edition" (PDF). Retrieved 25 June 2008. Page 39 – Production facilities specializing in high-quality transfer of vinyl to digital media should consider supplementing their conventional turntable with an ELP Laser Turntable(9) Instead of playing disks mechanically, this pricey device plays vinyl without mechanical contact to the disk, using laser beams instead.
  8. ^ Steven R. Rochlin. "Bill Gaw AA Chapter 55: ELP Laser Turntable". Archived from the original on 2 April 2012. Retrieved 23 October 2011.
  9. ^ "ELP Laser Turntable: plays vinyl records without a needle, presented by Audioturntable, Ltd". Archived from the original on 5 November 2011. Retrieved 23 October 2011.
  10. ^ Valin, Jonathan (24 November 2008). "ELP LT-1LRC Laser Turntable". The Absolute Sound. Archived from the original on 7 March 2014. Retrieved 3 July 2013.
  11. ^ "LT Specifications | ELP Laser Turntable". Archived from the original on 4 October 2017. Retrieved 11 October 2017.
  12. ^ "The World's Only Commercially-Sold Laser Turntable". 4 May 2015. Archived from the original on 12 October 2017. Retrieved 11 October 2017.
  13. ^ "ALMEDIO INC. | 株式会社アルメディオ". 9 June 2020. Archived from the original on 1 October 2020. Retrieved 6 August 2020.
  14. ^ "Decks And The City – Turntables At Munich High-End 2018". HiFi Pig. 16 May 2018. Archived from the original on 31 July 2018. Retrieved 4 August 2020.
  15. ^ "Optora 2018 Product Catalog" (PDF). 1 April 2018. Archived from the original (PDF) on 13 June 2018.
  16. ^ "OPTORA Optical Turntable another try at playing LPs with a laser". Archived from the original on 18 November 2021. Retrieved 6 August 2020.
  17. ^ "Best turntables you can buy, from affordable to absolute insanity - CNET". Archived from the original on 18 November 2021. Retrieved 6 August 2020.
  18. ^ "Optoraのご紹介|株式会社アルメディオ". Archived from the original on 14 November 2018. Retrieved 6 August 2020.
  19. ^ "Analog Corner #101 | Analog Planet". 12 November 2018. Archived from the original on 4 August 2020. Retrieved 10 October 2020.
  20. ^ Marsh, Allison (30 April 2018). "Particle Physics Resurrects Alexander Graham Bell's Voice". IEEE Spectrum. Archived from the original on 10 May 2018. Retrieved 9 May 2018.
  21. ^ "Playing the Unplayable Records". Smithsonian. 24 June 2017. Archived from the original on 9 May 2018. Retrieved 9 May 2018.
  22. ^ Greenfieldboyce, Nell (15 July 2007). "You Can Play the Record, but Don't Touch". NPR. Archived from the original on 12 August 2007. Retrieved 1 April 2018.
  23. ^ "Saphir: Optical Playback of Analogue Audio Disc Records". Institut national de l'audiovisuel. 2015. Archived from the original on 28 April 2021. Retrieved 2 March 2021.
  24. ^ Iwai, Toshiaki; Asakura, Toshimitsu; Ifukube, Tom; Kawashima, Toshio (1986). "Reproduction of sound from old wax phonograph cylinders using the laser-beam reflection method". Applied Optics. 25 (5): 597–604. Bibcode:1986ApOpt..25..597I. doi:10.1364/AO.25.000597. PMID 18231220.


{{bottomLinkPreText}} {{bottomLinkText}}
Laser turntable
Listen to this article

This browser is not supported by Wikiwand :(
Wikiwand requires a browser with modern capabilities in order to provide you with the best reading experience.
Please download and use one of the following browsers:

This article was just edited, click to reload
This article has been deleted on Wikipedia (Why?)

Back to homepage

Please click Add in the dialog above
Please click Allow in the top-left corner,
then click Install Now in the dialog
Please click Open in the download dialog,
then click Install
Please click the "Downloads" icon in the Safari toolbar, open the first download in the list,
then click Install

Install Wikiwand

Install on Chrome Install on Firefox
Don't forget to rate us

Tell your friends about Wikiwand!

Gmail Facebook Twitter Link

Enjoying Wikiwand?

Tell your friends and spread the love:
Share on Gmail Share on Facebook Share on Twitter Share on Buffer

Our magic isn't perfect

You can help our automatic cover photo selection by reporting an unsuitable photo.

This photo is visually disturbing This photo is not a good choice

Thank you for helping!

Your input will affect cover photo selection, along with input from other users.


Get ready for Wikiwand 2.0 🎉! the new version arrives on September 1st! Don't want to wait?