The locomotives, which entered in service in a small batch of 4 units, were characterized by a central cabin with two large hoods at each end. Built by Ganz, they had a similar mechanical equipment to the E.360 type. The E.380s showed a series of problems, so that two were refurbished as E.390.
The two fixed speeds were obtained by changing the motor connections. For high speed the motors were connected in parallel. For low speed the two motors were "cascaded" by connecting the rotor of one motor to the stator of the other. This caused both motors to run at half speed.[1]
The low power output at the highest speed, and the limitation of use to only two fixed speeds (due to the control arrangement of the three-phase motors) led both classes to be retired after a short service period.
This browser is not supported by Wikiwand :( Wikiwand requires a browser with modern capabilities in order to provide you with the best reading experience. Please download and use one of the following browsers:
Your input will affect cover photo selection, along with input from other users.
X
Get ready for Wikiwand 2.0 🎉! the new version arrives on September 1st! Don't want to wait?
Oh no, there's been an error
Please help us solve this error by emailing us at support@wikiwand.com
Let us know what you've done that caused this error, what browser you're using, and whether you have any special extensions/add-ons installed.
Thank you!